淡江大學機械與機電工程學系

:::

本系教師

基本資料表

名稱康尚文

辦公室電話3279

傳真02-26209745

辦公室E752

信箱swkang@mail.tku.edu.tw

自我介紹學歷：Dr. Engineering, Louisiana Tech University
經歷：
Tamkang Univ. Mechanical and Electro Mechanical Dept. Chairman

Tamkang Univ. Mechanical and Electro Mechanical Dept. Professor

Tamkang Univ. Mechanical Dept. Adjunct Professor 　
Member of the board of Nano and micro system technology association, R.O.C.

教師

類別專任教師

職稱教授

OfficeHour

授課領域1.熱傳導　
2.熱輻射

研究專長1. Loop heat pipe (LHP), Capillary pump loop (CPL)
2. Oscillating heat pipe (OHP), Pulsating heat pipe (PHP)
3. Thermosyphon
4. Vapor chamber, Heat spreader
5. Mini/Micro Heat Pipe, Nano-fliud in heat pipe

年度	論文名稱
2022	K.J. Bharanitharan; Shung-Wen Kang; K.J. Sanjay; S. Senthilkumar, A Combined Technique using Phase Change Material and Jet Impingement Heat Transfer for the Exhaust Heat Recovery Applications – A Numerical Approach, , Journal of Energy Storage 55, 105580, , pp
2022	Kuttum Pavan Kumar, Pratik Prakash Gupta, Sundararaj Senthilkumar, and Shung-Wen Kangn Kang, Numerical Flow Investigation of Hybrid Regenerator, , Journal of Chinese society of Mechanical Engineers 43(6), p.499-507, , pp
2021	Pratik Prakash Gupta; Sundararaj Senthilkumar; Shung-Wen Kang, Study of Gas-to-Liquid Heat Pipe Heat Exchanger, , Processes 10(5), 808, , pp
2021	Shung-Wen Kang; Chien-Hsuan Chan; Pai-Chun Hsiao, Study on Circulation Flow in Closed Loop Pulsating Heat Pipe, , Journal of the Chinese Society of Mechanical Engineer 43(2), p.79-86, , pp
2021	Kuruchanvalasu Jambulingam Bharanitharan; Sundararaj Senthilkumar; Kuan-Lin Chen; Kuan-Yu Luo; Shung-Wen Kang, Correlations Based on Numerical Validation of Oscillating Flow Regenerator, , Processes 10(7), 1400, , pp
2019	Shung-Wen Kang; Huan-Ming Yeh; Meng-Chang Tsai; His-Hsiang Wu, Manufacture and Test of a High Temperature Heat Pipe, , Journal of Applied Science and Engineering 22(3), p.493-499, , pp
2017	Shung-Wen Kang; Yao-Chun Wang; Ying-Chang Liu; Hsin-Min Lo, Visualization and thermal resistance measurements for a magnetic nanofluid pulsating heat pipe, , Applied Thermal Engineering, Vol. 126, , pp
2017	Shung-Wen Kang; Yao-Chun Wang; Ying-Chang Liu; Hsin-Min Lo, Visualization and thermal resistance measurements for a magnetic nanofluid pulsating heat pipe, , Applied Thermal Engineering,126,p.1044-1050, , pp
2015	Meng-Chang Tsai; Shung-Wen Kang; Heng-Yi Li; Wen-Fa Tsai, Operation of a Two-Phase Reverse Loop Thermosyphon, , Journal of Applied Science and Engineering=淡江理工學刊 18(3), pp.259-264, , pp
2013	Wang, Chien-Ping; Kang, Shung-Wen; Lin, Kuan-Min; Chen, Tzung-Te; Fu, Han-Kuei; Chou, Pei-Ting, Analysis of Thermal Resistance Characteristics of Power LED Module, , IEEE Transactions on Electron Devices 61(1), pp.105-109, , pp
2013	KANG, Shung-Wen; HUANG, Chun-Hsien; CHEN, Yu-Tang, Visualization and thermal resistance of a sintered wicks structure evaporator in a two phase loop thermosyphon, , Journal of Thermal Science and Technology 9(2), 14-00078(10pages), , pp
2012	Chen, Yu-tang; Kang, Shung-wen; Hung, Yu-hsun; Huang, Chun-hsien; Chien, Kun-cheng, Feasibility study of an aluminum vapor chamber with radial grooved and sintered powders wick structures, , Applied Thermal Engineering 51(1-2), pp.864–870, , pp
2012	Tsai, Meng-Chang; Kang, Shung-wen; Kleber Vieira de Paiva;Kang, Shung-Wen, Experimental studies of thermal resistance in a vapor chamber heat spreader, , Applied Thermal Engineering 56(1-2), pp.38-44, , pp
2011	康尚文; Kang, Shung-wen; Chen, Yu-tang ; Hsu, Chun-hsiang; Lin, Jun-ying, Temperature uniformity analysis of a multi-well vapor chamber heat spreader, , Frontiers in Heat Pipes 3, pp.013004(5 pages), , pp
2011	Tsai, Sheng-Hong; Chen, Yu-Tang; Kang, Shung-Wen, Fabrication of Composite Wick Structure Heat Spreader, , Journal of Marine Science and Technology=海洋學刊 20(2), pp.158-162, , pp
2011	Kang, Shung-Wen; Chien, Kun-Cheng; Lin, Wei-Chung, Multiple-Layer Heat Dissipation Module for LED Streetlamps, , Journal of Applied Science and Engineering=淡江理工學刊 15(2), pp.97-104, , pp
2010	Kang, Shung-wen; Tsai, Meng-chang; Hsieh, Chih-sheng; Chen, Jian-you, Thermal Performance of a Loop Thermosyphon, , 淡江理工學刊=Tamkang Journal of Science and Engineering 13(3)，頁281-288, , pp
2009	Hung, Yu-Hsun ; Kang, Shung-Wen ; Tsai, Wan-Chun, Strain Analysis of Vapor Chamber Heat Spreaders, , Journal of Marine Science and Technology=海洋學刊 18(2), pp.277-283, , pp
2009	Yu, Chun-sheng; Kang, Shung-wen; Chan, Hong-bin, Fabricating a Heat Pipe Structure within a Radiating Plate for Electronics Fan-Less Cooling, , Journal of Marine Science and Technology 18 (3), p.419-423, , pp
2009	Chen, Yu-Tang; Hsu, Chin-Chun; Tsai, Chieh-Hsiu; Kang, Shung-Wen, Fabrication of Microneedles, , Journal of Marine Science and Technology=海洋學刊 18(2), p.243-248, , pp
2009	Huang, Jheng-Hua; Huang, Chieh-Chen; Fang, Jia-You; Yang, Cheng; Chan, Chi-Ming; Wu, Nan-Lin; Kang, Shung-Wen; Hung, Chi-Feng, Protective effects of myricetin against ultraviolet-B-induced damage in human keratinocytes, , Toxicology in Vitro 24(1), pp.21-28, , pp
2008	Lin, Yu-hsing; Kang, Shung-wen; Chen, Hui-lun, Effect of silver nano-fluid on pulsating heat pipe thermal performance, , Applied Thermal Engineering 28(11-12), pp.1312–1317, , pp
2008	Lin, Yu-hsing ; 康尚文; Kang, Shung-wen; Wu, Tsung-yu, Fabrication of polydimethylsiloxane (PDMS) pulsating heat pipe, , Applied Thermal Engineering 29(2-3), pp.573-580, , pp
2008	康尚文; Kang, Shung-wen; Wei, Wei-chiang; Tsai, Sheng-hong; Huang, Chia-ching, Experimental investigation of nanofluids on sintered heat pipe thermal performance, , Applied Thermal Engineering 29(5-6), pp.973-979, , pp
2007	Kang, Shung-wen; Chen, Yu-tang; Lee, Sheng-hua, Fabrication and investigation of PDMS micro-diffuser/nozzle, , Journal of Materials Processing Technology198, pp.478-484, , pp
2006	Kang, Shung-wen; Wei, Wei-Chiang; Tsai, Sheng-Hong; Yang, Shih-Yu, Experimental investigation of silver nano-fluid on heat pipe thermal performance, , Applied Thermal Engineering 26(17-18), pp.2377-2382, , pp
2006	Kang, Shung-Wen; Tseng, Shin-Chau, Analysis of effectiveness and pressure drop in micro cross-flow heat exchanger, , Applied Thermal Engineering 27(5-6), pp.877-885, , pp
2005	Chen, Yu-tang; 康尚文; Kang, Shung-wen; Wang, Wei-de; Jou, Yan-jr, Fanno-Line Flow in Microtubes, , Journal of Aeronautics, Astronautics and Aviation . Series A 38(1), pp.21-26, , pp
2005	Tsai, Meng-Chang; Chang, Shin-Hsing, Axial heat conduction model to predict maximum heat remove of miniature heat pipe based on grey model theory, , Chinese Journal of Mechanical Engineering 18(4), pp.477-481, , pp
2005	康尚文; Kang, Shung-wen; Chen, Yu-tang; Liu, Hsung-pen, Brazing diffusion bonding of micro-nickel cylinders and SUS-316 stainless steel, , Journal of Materials Processing Technology 168(2), pp.286-290, , pp
2005	蔡聲鴻; 陳育堂; 康尚文; Kang, Shung-wen; 張裕民, A Comparison between Triangular Grooves, Star Grooves and Rhombus Grooves in Micro Heat Pipe Manufacture, , Journal of the Chinese Society of Mechanical Engineers 27(1), pp.1-5, , pp
2005	康尚文; Kang, Shung-wen; 林玉興; Lin, Yu-Hsing, Manufacturing of Film-Type Heat Pipe, , 中國機械工程學刊=Journal of the Chinese Society of Mechanical Engineering 27(1), pp.13-17, , pp
2004	Hsu, Chin-chun; 康尚文; Kang, Shung-wen; Hou, Tung-fu, Performance Testing of Micro Loop Heat Pipes, , 淡江理工學刊=Tamkang Journal of Science and Engineering 8(2), pp.123-132, , pp
2003	康尚文; Kang, Shung-wen; Tsai, Sheng-hong; Ko, Ming-han, Metallic micro heat pipe heat spreader fabrication, , Applied thermal engineering 24(2-3), pp.299-309, , pp
2003	康尚文; Kang, Shung-wen; 陳育堂; Chen, Yu-Tang; 杜文謙; Tu, Wen-chien; 蕭聰鑫; Hsiao, Tsung-Hsin, Experimental Investigation of Fluid Flow and Heat Transfer in Microchannels, , 淡江理工學刊=Tamkang journal of science and engineering 7(1)，頁11-16, , pp
2002	康尚文; Kang, Shung-wen; Huang, Derlin, Fabrication of star grooves and rhombus grooves micro heat pipe, , Journal of micromechanics and microengineering 12(5), pp.525-531, , pp
2002	陳育堂; Chen, Y. T.; 康尚文; Kang, Shung-wen; 張碧峰; Chang, P. F., A manufacturing technique for 3D polymer micro-venturi tube, , International journal of machine tools & manufacture 43(4), pp.421-424, , pp
2002	康尚文; Kang , Shung-wen; Tsai, Sheng-hong; Chen, Hong-chih, Fabrication and test of radial grooved micro heat pipes, , Applied thermal engineering 22(14), pp.1559-1568, , pp
2002	楊龍杰; Yang, Lung-jieh; Wu,Tsung-tsong; Kang,Shung-wen, The Microsensor Technology Using to Identify the Initiation Time of Impact Induced Elastic Waves, , 淡江理工學刊=Tamkang journal of science and engineering 5(3), pp.121-127, , pp
2001	陳慶祥; Chen, Ching-shung; 康尚文; Kang, Shung-wen; 郭維仁; Kuo, Wei‐jen, The Friction Characteristics of Gaseous Slip Flow in Microtubes, , Journal of the Chinese Institute of Engineers=中國工程學刊 24(5), pp.641-647, , pp
2001	楊龍杰; Yang, Lung-jieh; 康尚文; Kang, Shung-Wen, The SOI-like method of reducing the die size of bulk-micromachined sensors, , Sensors and materials 14(1), pp.23-34, , pp
2000	杜文謙; 楊龍杰; 康尚文, 微型流道熱沉與熱管之製作與實驗, , 臺灣大學工程學刊=Bulletin of the College of Engineering, National Taiwan University 80，頁59-77, , pp
2000	Lin, C. B.; Hung, Y. W.; Liu, Woe-chun; Kang, Shung-wen, Machining and fluidity of 356Al/SiC(p) composites, , Journal of Materials Processing Technology 110(2), pp.152-159, , pp
1999	康尚文; 楊龍杰; 黃德麟; 蕭聰鑫, 微冷卻器簡介, , 機械月刊=Machinery Monthly 25(11)=292，頁343-353, , pp
1999	Yang, Hsiharng; 康尚文; Kang, Shung-wen, Improvement of thickness uniformity in nickel electroforming for the LIGA process, , international journal of machine tools and manufacture 40(7), pp.1065-1072, , pp
1997	康尚文; Kang, Shung-wen; Chen, Jong-shun; Hung, Jong-yun, Surface roughness of (110) orientation silicon based micro heat exchanger channel, , International journal of machine tools and manufacture 38(5-6), pp.663-668, , pp
1993	康尚文; Kang, Shung-wen, 以鑽石刀加工之熱交換器, , Precision engineering16(1), pp.56-59, , pp
1993	康尚文, Performance of high flux heat exchangers fabricated by diamond machining, , Precision engineering journal, , pp
1993	Friedrich, C. R.; Kang, Shung-wen, Micro heat exchangers fabricated by diamond machining, , Precision Engineering 16(1), pp.56-59, , pp
1985	杜文謙; 康尚文, 有機液體中複數汽泡之消滅, , 中國機械工程學刊7(2)，頁87-98, , pp

年度	論文名稱
2020	Bharanitharan K J, Yung-Chuan Hu, Che-Lung Lin, S Senthilkumar and Shung-Wen Kang, Experimental and Numerical Study on Pressure Drop Prediction of Oscillating Flow Stirling Regenerator used for Energy Storage Systems, , International Conference on Advances in Renewable and Sustainable Energy Systems, , 2020-12-03-
2020	古佩笛; 康尚文, Study of Gas to Liquid Heat Pipe Heat Exchanger, , 2021 台灣熱管理協會年會暨技術成果發表會, , 2021-04-22-
2017	洪緯杰; 王承緯; 康尚文, 熱管熱交換器之製造, , 第15屆大陸全國熱管會議, , 2017-09-22-
2017	Shung-Wen Kang; Chen-Yu Lu; Wei-Jie Hung; Cheng-Wei Wang, Development of Heat Pipe Heat Exchanger, , Joint 19th IHPC and 13th IHPS, , 2018-06-10-
2017	Huan-Ming Yeh; Chun-lin Chang; Meng-Chang Tsai; His-Hsiang Wu; Shung-Wen Kang, Experimental Investigation on Startup and Thermal Performance of a High Temperature Heat Pipe, , Joint 19th IHPC and 13th IHPS, , 2018-06-10-
2016	Cheng-Wei Wang; Shung-Wen Kang, Development of High-efficiency Heat Exchanger, , Asian Conference on Thermal Sciences 2017, , 2017-03-26-
2016	Hsi-Hsiang Wu; Meng-Chang Tsai; Cheng-Wei Wang; Shung-Wen Kang, Development of High Temperature Heat Pipe, , Asian Conference on Thermal Sciences 2017, , 2017-03-26-
2015	康尚文, 可視化無泵兩相逆流熱虹吸迴路設計與測試, , 第十四屆全國熱管會議論文集, , 2015-08-20-
2015	Meng-Chang Tsai; Heng-Yi Li; Wen-Fa Tsai; Shung-Wen Kang, Operational Characteristics Of A Reverse Thermosyphon Loop With a Large Pre-Heat Accumulator, , IX Conference “Minsk International Seminar “Heat Pipes, Heat Pumps, Refrigerators, Power Sources”會議論文集, , 2015-09-07-
2014	何啟東; 康尚文; 李慶烈; 黃中信; 林玉興; 吳容銘; 林正嵐; 葉和明; 鄭東文; 黃國楨; 陳逸航; 高思懷; 張煖; 張珏庭, 應用集光型太陽熱電驅動史特靈引擎之薄膜蒸餾海水淡化技術研發, , 2014永續發展整合研究成果發表會，頁32-43, , 2014-10-20-
2012	Kang, Shung-wen; Lin, Jun-ying; Huang, Chun-hsien; Chen, Yu-tang, Temperature Uniformity Simulation of Vapor Chamber, , The 7th IMPACT Conference, , 2012-10-24-
2012	康尚文; 林駿穎; 黃俊賢; 陳育堂, 蒸汽腔體均溫性之數值模擬, , 第十三屆全國熱管學術會議, , 2012-09-01-
2012	Lin, Kuan-Ying; Chang, Yu-Sheng; Kang, Shung-Wen; Tsai, Meng-Chang, Thermal Performance of Vapor Chamber Heat spreader, , THE 11th International Heat Pipe Symposium（11IHPS）, , 2013-06-09-
2012	Chang, Yu-Sheng; Lin, Kuan-Ying; Kang, Shung-Wen; Tsai, Meng-Chang, Temperature Uniformity and Heating Rate Simulation of Vapor Chamber Heat Spreader, , The 11th International Heat Pipe Symposium（11IHPS）, , 2013-06-09-
2012	Hsiao, Pai-Chun; Chan, Chien-Hsuan; Lin, Yu-Hsing; Kang, Shung-Wen, Study on Circulation Flow in Closed Loop Pulsating Heat Pipe, , The 11th International Heat Pipe Symposium（11IHPS), , 2013-06-09-
2011	康尚文; Kang, Shung-wen; Chen, Yu-tang; Hsu, Chun-hsiang; Lin, Jun-ying, Temperature Uniformity Analysis of a Multi-Well Vapor Chamber Heat Spreader, , The 10th International Heat Pipes Symposium(10th IHPS), pp.283-288, Taipei, Twiwan, , 2011-12-06-
2011	康尚文; Kang, Shung-wen; Chien, Kun-cheng; Lin, Wei-chung, Thermal Analysis and Test of the Multiple-Layer Heat Dissipating Module for LED Streetlamps, , The 10th International Heat Pipes Symposium(10th IHPS), Taipei, Twiwan, pp.277-282, , 2011-11-06-
2011	康尚文; Kang, Shung-wen; Tsai, Meng-chang, Development and Application of Heat Pipe and Vapor Chamber Heat Spreader, , 6th International Microsystems, Packaging, Assembly and Circuits Technology Conference, IMPACT 2011 and International 3D IC Conference, Taipei, , 2011-10-18-
2010	Yu, Chun-sheng; Kang, Shung-wen; Weng, Ming-tai, Effective thermal management of multiple electronic components, , Microsystems Packaging Assembly and Circuits Technology Conference (IMPACT), 2010 5th International, , 2010-10-20-
2009	Kang, Shung-wen; Tsai, Meng-chang; Weng, Ming-tai; Hsu, Chao-hsiang, Development of Thermal Spreading Technology Nowadays, , Microsystems, Packaging, Assembly and Circuits Technology Conference, 2009. IMPACT 2009. 4th International, , 2009-10-21-
2009	Tsai, Meng-chang; Yu, Chun-sheng; Kang, Shung-wen, A Large Size Vapor Chamber Used on Multiple Heat Sources Blade Server System, , The 15th International Heat Pipe Conference (15IHPC), Clemson, South Carolina, USA, , 2010-04-25-
2009	Kang, Shung-wen; Kuo, Meng-yuan; Chen, Jian-you; Lu, Wen-an, Fabrication and test of gamma-type stirling engine, , Energy and Sustainable Development: Issues and Strategies (ESD), 2010 Proceedings of the International Conference on, , 2010-06-02-
2009	康尚文; 吳宗謙; 黃瑞彬, 平板式熱管之研製與可視化觀察, , 第七屆海峽兩岸航空太空學術研討會論文集，頁255-261, , 2010-11-16-
2008	康尚文; Kang, Shung-wen; Chien, Kun-cheng; Chou, Yen-chih, Fabrication and Analysis of Heat Dissipation Module for High-Power Light Emitting Diode Streetlamp, , The 9th International Heat Pipe Symposium, Malaysia, pp.227-230, , 2008-11-17-
2008	康尚文; 蔡孟昌; 黄啟堯, 放射狀溝槽蒸汽腔體製造與測試, , 第十一屆熱管研討會，山東威海, , 2008-09-07-
2008	康尚文; Kang, Shung-wen; Hung, Yu-hsun, Feasibility Study of an Aluminum Vapor Chamber, , The 9th International Heat Pipe Symposium, Malaysia, pp.103-106, , 2008-11-17-
2008	Tsai, Meng-chang; Chien, Kun-cheng; Huang, Chi-yao; Kang, Shung-wen, Thermal Performance of a Vapor Chamber, , The 9th International Heat Pipe Symposium, Malaysia, pp.86-89, , 2008-11-17-
2008	Lin, Yu-hsing; Chen, Kuan-ting; Cheng, Po-hsuan; Kang, Shung-wen, Fabrication of PCP Pulsating Heat Pipe, , The 9th International Heat Pipe Symposium, Malaysia, pp.121-124, , 2008-11-17-
2008	Kang, Shung-wen; Tsai, Meng-chang; Wang, Yu-hsuan, Preliminary Study of Diffuser Channels Evaporator, , The 9th International Heat Pipe Symposium, Malaysia, pp.204-207, , 2008-11-17-
2008	康尚文, 太陽能熱電系統開發簡介, , 第四屆兩岸能源與環境永續發展科技研討會, , 2008-08-04-
2008	康尚文, 微型交錯式逆向流熱交換器的製程及實驗, , 第六屆海峽兩岸航空航太學術研討會, 西安, , 2008-09-01-
2008	Tsai, Meng-Chang; Kang, Shung-Wen; Lin, Chih-Hsien, A novel copper bead heat sink for computer cooling, , Semiconductor Thermal Measurement and Management Symposium, 2009. SEMI-THERM 2009. 25th Annual IEEE, , 2009-03-15-
2007	康尚文; 蔡孟昌, 無閥多孔介質熱傳泵性能初步研究, , 中國機械工程學會第二十四屆全國學術研討會，頁476-479, , 2007-11-23-
2007	康尚文; 蔡孟昌; 林維忠; 盧玟銨, 密閉二相虹吸式熱管之散熱效能研究, , 中國機械工程學會第二十四屆全國學術研討會，頁245-249, , 2007-11-23-
2007	Chen, Yu-tang; Wei, Wei-chaing; 康尚文; Kang, Shung-wen; Yu, Chun-sheng, Effect of Nanofluid on Flat Heat Pipe Thermal Performance, , The 24th Semionductor Thermal Measurement and Management Symposium, San Jose, CA USA, pp.16-19, , 2008-03-16-
2007	康尚文, 無閥擴散流道汽泡泵性能之初步研究, , 中國機械工程學會第二十四屆全國學術研討會，頁492-496, , 2007-11-23-
2007	康尚文; 蔡孟昌, 無閥多孔質熱傳泵性能初步研究, , 2007 CSME CONF中國機械工程學會第24屆全國學術研討會=The 24th National Conference on Mechanical Engineering the Chinese Society of Mechanical Engineers, , 2007-11-23-
2007	康尚文; 蔡孟昌; 王御軒; 陳伯丞, 無閥擴散流道汽泡泵性能之初步研究, , 2007 CSME CONF中國機械工程學會第24屆全國學術研討會=The 24th National Conference on Mechanical Engineering the Chinese Society of Mechanical Engineers, , 2007-11-23-
2007	康尚文; 蔡孟昌; 林維忠; 盧玟銨, 密閉二相虹吸式熱管之散熱效能研究, , 2007 CSME CONF中國機械工程學會第24屆全國學術研討會=The 24th National Conference on Mechanical Engineering the Chinese Society of Mechanical Engineers, , 2007-11-23-
2006	Chen, Yu-tang; 康尚文; Kang, Shung-wen; Hsu, Chin-chun; Lin, Jun-wei, Micro Fuse Fabrication and Testing, , 第10屆奈米工程暨微系統技術研討會, , 2006-11-30-
2006	Hsieh, Chih-sheng; Chien, Kun-cheng; Kang, Shung-wen, Enhancement of Boiling Structure in Loop Thermosyphon, , The 8th International Heat Pipe Symposium, Kumamoto, Japan, pp.79-83, , 2006-09-24-
2006	Yu, Chun-sheng; Yu, Jason; 康尚文; Kang, Shung-wen, Heat Plate Optimize with Fin Performance on Industrial Computer Fan Less Design, , The 8th International Heat Pipe Symposium, Kumamoto, Japan, pp.177-181, , 2006-09-24-
2006	Kang, Shung-wen; Tsai, Meng-chang; Chien, Kun-cheng, Evaluating Heat Pipe Used in High Power LEDs for Outdoor Landscape Lighting Application, , The 8th International Heat Pipe Symposium, Kumamoto, Japan, pp.291-294, , 2006-09-24-
2006	Wei, Wei-chaing; Kang, Shung-wen; Huang, Chia-ching, Performance Test of Silver Nano-fluid Filled Screen-wick Heat Pipe, , The 8th International Heat Pipe Symposium, Kumamoto, Japan, pp.375-379, , 2006-09-24-
2006	Hsu, Chin-Chun; Chen, Yu-Tang; Tsai, Chieh-Hsiu; Kang, Shung-Wen, Fabrication of Microneedles, , Nano/Micro Engineered and Molecular Systems, 2007. NEMS '07. 2nd IEEE International Conference on, , 2007-01-16-
2006	Lin, Yu-hsing; Tsai, Meng-chang; Wu, Tsung-yu; 康尚文; Kang, Shung-wen, Fabrication of Mini Type Pulsating Heat Pipe, , The 14th International Heat Pipe Conference, April 22 to 27, 2007., , 2007-04-22-
2006	Tsai, Meng-chang; Hsieh, Chih-sheng; 康尚文; Kang, Shung-wen, Experimental study of a Loop Thermosyphone Using Methanol as Working Fluid, , The 14th International Heat Pipe Conference, , 2007-04-22-
2006	康尚文, 微型迴路式熱管之灰關聯分析, , 中國機械工程學會第二十二屆全國學術研討會, 桃園中壢, , 2006-11-25-
2006	康尚文, 微保險絲製造與測試, , 第二十二屆中國機械工程研討會, 中壢台灣, , 2006-11-25-
2006	康尚文, 迷你平板迴路式熱管之研製, , 2006熱流暨能源學門成果發表暨規劃會議, , 2006-10-27-
2006	康尚文, 銅網毛細蒸汽腔體之研製, , 2006熱流暨能源學門成果發表暨規劃會議, , 2006-10-27-
2005	Wei, W. C.; Tsai, S. H.; Yang, S. Y.; Kang, S. W., Effect of Nanofluid on Heat Pipe Thermal Performance, , Proceedings of the 3rd IASME/WSEAS Int. Conf on heat transfer, thermal engineering and environment, Corfu, Greece, pp.115-117, , 2005-08-01-
2005	Kang, Shung-wen; Lin, Y. H., Manufacturing of Film-Type Heat Pipe, , Proceeding of ICAM 2005: 2005 International Conference on Advanced Manufacture, Taipei, Taiwan, , 2005-11-01-
2005	康尚文; 蔡孟昌; 黃鴻鈞, 微型迴路式熱管之灰關聯分析, , 中國機械工程學會第二十二屆全國學術研討會，中壢，頁137-142, , 2005-11-01-
2005	Chou, Yen-chih; Chen, Yu-tang; Kang, Shung-wen, Study of Evaporation Phenomena in Micro Channels, , Nano/Micro Engineered and Molecular Systems, 2006. NEMS '06. 1st IEEE International Conference on, , 2006-01-18-
2005	康尚文; 陳育堂; 張明正; 杜文謙, 曲面微噴嘴/擴大器之數值分析, , 第五屆海峽兩岸航空太空學術研討會, , 2006-03-14-
2005	蔡聲鴻; 陸嘯程; 陳育堂; 康尚文, 交叉結構式均熱片之研製, , 中國機械工程學會第二十三屆全國學術研討會，台南, , 2006-01-01-
2005	陳育堂; 康尚文; 許欽淳, PDMS微噴嘴之製造與分析, , 中國機械工程學會第二十三屆全國學術研討會，台南, , 2006-01-01-
2005	康尚文; 蔡孟昌; 黃鴻鈞, 微型迴路式熱管之灰關聯分析, , 中國機械工程學會第二十二屆全國學術研討會, , 2005-11-25-
2005	林俊偉; 陳育堂; 劉百銓; 康尚文, 微保險絲製造與測試, , 中國機械工程學會第二十二屆全國學術研討會, , 2005-11-25-
2005	蔡杰修; 陳育堂; 蔡萬俊; 康尚文, 微針陣列之研製, , 中國機械工程學會第二十三屆全國學術研討會，台南, , 2006-01-01-
2005	Chen, Yu-tang; Hsu, Chin-chun; Chang, Ming-cheng; Kang, Shung-wen, Numerical Studies of Curved-walled Micro Nozzle/Diffuser, , Nano/Micro Engineered and Molecular Systems, 2006. NEMS '06. 1st IEEE International Conference on, , 2006-01-18-
2004	Kang, Shung-wen; Hsu, Chin-chun; Hou, Tung-fu, Micro Loop Heat Pipes, , The 13th International Heat Pipe Conference, China, , 2004-09-01-
2004	康尚文, 微噴嘴之製造與分析, , 2004航空機械工程學術研討會, 岡山, , 2004-10-15-
2004	康尚文, 微圓管內空氣流實驗研究, , 第四屆海峽兩岸航空航天學術研究會, 中國上海, , 2004-08-28-
2004	Tsai, Meng-chang; Yu, Chun-sheng; Kang, Shung-wen, Flat plate loop heat pipe with a novel evaporator structure, , Semiconductor Thermal Measurement and Management Symposium, 2005 IEEE Twenty First Annual IEEE, , 2005-03-15-
2003	Yu, Chun-sheng; Tsai, Meng-chang; Kang, Shung-wen, The Thermal Performance Investigation of Micro Porosity Sintered wick in Vapor Chamber, , PowerMEMS, Japan, pp.100-103, , 2004-01-01-
2003	楊龍杰; Yang, Lung-jieh; Chen, Hung-yin; Wang, Shin-shiung; Wang, Yi-chung; Kang, Shung-wen, Fabrication of SU-8 embedded microchannels with circular cross-section, , International Conference on Electrical Engineering 2004 joined with Asia-Pacific Conference of Transducers and Micro-Nano Technology 2004, Sapporo, Japan, pp.423-427, , 2004-07-01-
2003	康尚文, Fabrication of Film Type Heat Pipes, , The 7th International Heat Pipe Symposium, 南韓, , 2003-10-12-
2002	莊晉東; 柯明翰; 康尚文, 金屬微熱管均熱片之研製, , 中國機械工程學會第十九屆全國學術研討會，頁675-682, , 2002-12-01-
2002	康尚文; 侯東甫; 杜文謙, 微型迴路式熱管之研製, , 2002奈米工程暨微系統技術研討會, , 2002-11-01-
2001	黃鈺霖、楊龍杰、康尚文、洪祖昌, 電流體驅動(EHD)微幫浦的研製, , 精密機械製造學術研討會，臺北縣, , 2001-11-03-
2001	康尚文; Kang , Shung-wen; Tsai, Sheng-hong; Chen, Hong-chih, Fabrication of micro radial grooved heat pipes, , Proceedings of the 12th International Heat Pipe Conference, Moscow, Russia, , 2002-05-01-
2001	陳育堂; 張碧峰; 康尚文; 杜文謙, 微文氏管與孔口之研製, , 中華民國力學學會90年度年會暨第25屆全國力學會議=25 National Conference of Theoretical and Applied Mechanics, , 2001-12-15-
2000	鄭金郎; 楊龍杰; Yang, Lung-jieh; 陳明正; 康尚文, 電腦輔助設計應用於微型壓力感測器之性能評估, , 第17屆中國機械工程學會學術研討會論文集-5，高雄，頁441-448, , 2000-10-01-
2000	楊文瑞; 楊龍杰; Yang, Lung-jieh; 康尚文; 楊賢政, 白金薄膜感測器應用於微流道的現地溫度量測, , 第17屆中國機械工程學會學術研討會論文集-5，高雄，頁217-224, , 2000-10-01-
2000	康尚文; 楊龍杰; Yang, Lung-jieh; 杜文謙; 陳泓志; 黃德麟, 星形與平板式微熱管之研製與性能分析比較, , 第17屆中國機械工程學會學術研討會論文集-5，高雄，頁225-232, , 2000-10-01-
2000	康尚文; Kang, Shung-wen, 微型熱交換器之製造, , 精密微小製程研討會, , 2001-04-12-
2000	鄭金郎; Cheng, Chin-Lang; 楊龍杰; Yang, Lung-Jieh; 康尚文; Kang, Shung-Wen, 電腦輔助分析應用於微型壓力感測器之性能評估, , 八十九年度中華民國力學學會年會暨第二十四屆全國力學會議=24th National Conference on Applied and Theoretical Mechanics, , 2000-12-09-
2000	郭維仁; Kuo, W. J.; 康尚文; Kuo, W. J.; 陳慶祥; Chen, C. S., 微圓管滑動氣體流場摩擦特性之探討, , 第三屆海峽兩岸航空太空學術研討會, , 2001-05-29-
2000	康尚文; 楊龍杰; 杜文謙, 微型流道熱沈與熱管之製作與實驗, , 第三屆海峽兩岸航空太空學術研討會, , 2001-05-29-
2000	鄭金郎; 楊龍杰; 康尚文; 曾信傑; 郭柏甫; 黃志豪, ANSYS應用於微型壓力感測器之性能評估, , 2000年第六屆台灣地區ANSYS研討會=2000 ANSYS Taiwan User's Conference, , 2000-11-13-
2000	康尚文; 楊龍杰; 杜文謙; 陳泓志; 黃德麟, 星形與平板式微熱管之研製與性能分析比較, , 中國機械工程學會第十七屆全國學術研討會, , 2000-12-08-
2000	楊文瑞; 楊龍杰; 康尚文; 楊賢政, 白金薄膜感測器應用於微流道的現地溫度量測, , 中國機械工程學會第十七屆全國學術研討會, , 2000-12-08-
1999	Yang, Lung-jieh; 康尚文; Kang, Shung-wen, Micro fluidic system of micro channels with on-site sensors by silicon bulk micromachining, , Proceedings of SPIE-the international society for optical engineering v.3877, pp.267-272, , 1999-09-20-
1999	楊龍杰; Yang, Lung-jieh; Kang, Shung-wen, A micro fluidic system of micro channels with on-site sensors by the silicon bulk micromachining, , SPIE's symp. on micromachining and microfabrication v.3877-37, , 1999-09-20-
1999	黃玉年; 康尚文; 黃德麟, 三角型流道微熱管之研製與測試, , 第六屆微機系統科技協會年會暨微機電系統成果發表會，淡水，頁212-215, , 2000-03-01-
1999	黃玉年; 康尚文; 黃德麟; 楊龍杰, 矽質微熱管之研製與測試, , 中國機械工程學會第十六屆全國學術研討會論文集，頁411-418, , 1999-12-01-
1999	康尚文; 黃德麟, 星形流道矽質微熬管之研製與測試, , 第一屆海峽兩岸微系統科技研討會, Tannan, , 2000-05-01-
1999	楊龍杰; Yang, Lung-jieh; 楊賢政; 康尚文, 矽質微型感測器應用於微流道的現地量測, , 中華民國力學學會第廿三屆全國力學會議=The 23nd National Conference on Theoretical and Applied Mechanics, , 1999-12-17-
1999	康尚文; 黃德麟, 星形流道矽質微熱管之研製與測試, , 第一屆海峽兩岸微系統科技研討會, , 2000-05-17-
1999	楊龍杰; 康尚文; 楊賢政; 陳明正, Semi-SOI Pressure Sensors as Lab-on-Chip Systems Applied to Micro Fluid Dynamics, , 第一屆海峽兩岸微系統科技研討會, , 2000-05-17-
1999	Yang, Lung-Jieh; Chen, Ming-Cheng; Chang, Chin-Jung, Micro Pressure Sensor with Sub-mm Size by the Silicon Bulk Micromachining, , 1999年中華民國電子材料與元件研討會, , 1999-11-25-
1999	楊龍杰; 楊賢政; 康尚文, 矽質微型感測器應用於微流道的現地量測, , 中華民國力學學會第廿三屆全國力學會議=23nd National Conference on Theoretical and Applied Mechanics, , 1999-12-17-
1998	Yang, Hsiharng; 康尚文; Kang, Shung-wen; Chou, Min-Chieh, Three x-ray mask-making methods applied for LIGA process, , Proceedings of SPIE on photomask and x-ray mask technology VI. SPIE, v.3748, SPIE-the international society for optical engineering, pp.495-502, , 1999-04-01-
1998	楊龍杰; Yang, Lung-jieh; Liu, P. C.; Kang, Shung-wen; Duh, W. C., Binary deposition method using standard CMOS structural layers to fabricate optical gratings and microlenses, , Proceedings of SPIE-the international society for optical engineering 3740, Yokohama, Japan, pp.438-441, , 1999-06-16-
1998	康尚文; 杜文謙; 陳中舜; 余駿生, 微流道熱沉之研製與熱流分析, , 中國機械工程學會第十五屆全國學術研討會論文集，臺南，頁423-430, , 1998-11-01-
1998	康尚文; Kang, Shung-wen; Yang, Lung-jieh; Hung, Jong-yun; Chen, Jong-shun, (110)orientation silicon based micro heat exchanger channel, , The 11th international symposium on transport phenomena, HsinChu, pp.512-515, , 1998-11-29-
1997	康尚文; 陳中舜; 洪宗裕, 矽質微流道熱散的性能研究與分析, , 第二屆奈米工程暨微系統技術研討會論文集，頁2~197-2~201, , 1998-05-01-
1997	Hung, Y. W.; Lin, C. B.; Kang, Shung-wen; Wang, Woan-chwen, Machining and fluidity of A356 AI/SiC(P) composites, , 中國機械工程學會第十四屆全國學術研討會論文集, , 1997-12-01-
1996	康尚文; 陳盈璋; 陳中舜, 微光學平板之研製, , 次世代製造技術研討會論文集，頁3~29-3~34, , 1997-04-01-
1996	康尚文; Kang, Shung-wen; 張廣祥; Chang, Guang-shang, The Manufacture and Test of (110) Orientated Silicon Based Micro Heat Exchanger, , 中國機械工程學會第十三屆全國學術研討會論文集(設計)，台北市，頁127-133, , 1996-11-30-
1996	康尚文, (110)矽晶材料微型熱交換器通道之表面粗糙度研究, , 第一屆微系統技術研討會, , 1997-05-01-
1996	Kang, Shung-wen; Chen, J. S.; Hung, J. Y.; Liu, W. C., Surface roughness of (110) orientation silicon base micro heat exchanger channel, , 7th international conterence on metrology and properties of engineering surfaces, , 1997-04-02-
1996	康尚文; 張廣祥, (110)矽晶材料微型熱交換器製造與測試, , 中國機械工程學會第十三屆全國學術研討會=The Thirteen National Conference of the Chinese Society of Mechanical Engineers, , 1996-11-30-
1995	康尚文; 張廣祥, 微型熱交換器之研製, , 第一屆海峽兩岸航空太空學術研討會, , 1995-12-14-
1994	康尚文; Kang, Shung-wen, 金屬薄膜微型熱交器之製造, , 第一屆亞太暨第二屆日中國際切削磨削研討會論文集, , 1994-09-01-
1994	康尚文; Kang, Shung-wen; Teng, Hui-yun, Application of Metal Foils Diffusion Bonding---Fabrication of Micro Heat Exchanger, , 第八屆國際精密工程研討會論文集, Compiegne, France, , 1995-05-15-
1993	康尚文; Kang, Shung-wen, Application of metal foils diffusion bonding--Fabrication of micro heat exchanger, , 超塑性成形與擴散接合學術研討會論文集，台北市台灣大學工學院，頁333-338, , 1994-07-08-
1993	康尚文, 以鑽石刀加工之高效率熱交換器之性能 Performance of high flux heat exchangers fabricated by diamond machining, , 一九九三年美國精密工程學會年會論文集, , 1993-11-07-
1993	康尚文, 金屬薄膜擴散接合之應用─微型熱交換器之製造, , 超塑性成形與擴散接合學術研討會, , 1994-07-08-
1992	康尚文, 薄膜式微型熱交換器之製造 Fabrication of foil-based micro heat exchangers, , Progress of cutting and grinding: with some problems in CADCAM, FMS and mechatronics=第一屆歐洲熱科學會議論文集, Shanghai, China, , 1992-09-01-
1984	康尚文; 杜文謙, 有機液體中複數汽泡之消滅, , 輸送現象與其應用專題研討會專輯，頁1-6, , 1985-06-01-

年度	書名
2002	康尚文; 楊鍚杭; 林哲平, 微結構, , 新竹市：行政院國家科學委員會精密儀器發展中心

發表日期	專利名稱	專利編號	專利國別	專利人
2021-05	REGENERATOR		en_US	Shung-Wen Kang; Ping-Ming Tu
2021-02	再生器		zh_TW	康尚文; 杜秉明
2020-11	STIRLING COOLER AND SEALING STRUCTURE THEREOF		zh_TW	Shung-Wen Kang; Chun-Lin Chang
2020-08	史特靈冷凍機及其密封結構;;專利期間:2020,8.21~2039.5.21		zh_TW	康尚文; 張濬麟
2019-01	FILLING PIPE FOR USE IN HIGH-TEMPERATURE HEAT PIPE FILLING OPERATION		en_US	Shung-Wen Kang; Kun-Cheng Chien
2016-09	用於高溫熱管填充作業之填充管		zh_TW	康尚文
2011-11	高功率發光二極體照明燈具與其散熱模組		zh_TW	康尚文; 蔡孟昌; 簡坤誠
2011-11	可增强支撐强度與毛細作用之均熱裝置		zh_TW	康尚文; 蔡孟昌
2011-11	可增强支撑强度与毛细作用的均热装置		zh	康尚文; 蔡孟昌
2011-11	Thermal spreader for simultaneously enhancing capillary effect and structural strength		en	康尚文; Kang, Shung-wen; Tsai, Meng-chang
2011-09	Loop heat pipe with flat evaportor having a wick with an internal chamber		en	康尚文; Kang, Shung-wen; Tsai, Meng-chang
2010-10	以多層基板結構散熱之LED燈具		zh_TW	康尚文; 簡坤誠
2010-08	多段層基板によって達成されかつ熱を即座に放散するＬＥＤランプ		jp	康尚文; 簡坤誠
2010-05	高功率发光二极管照明灯具与其散热模块		zh	康尚文; 蔡孟昌; 簡坤誠
2009-11	具有平板蒸發器結構之迴路式熱管		zh_TW	康尚文; 蔡孟昌
2009-04	放熱装置		jp	康尚文; Kang, Shung-wen; 蔡孟昌; Tsai, Meng-chang
2008-11	平板蒸发器结构及具有平板蒸发器结构的回路式热管		zh	康尚文; 蔡孟昌
2008-10	High Power Led Lighting Assembly Assembled With Heat Radiation Module With Heat Pipe		jp	康尚文; Kang, Shung-wen; Tsai, Meng-chang; Chien, Kun-cheng
2007-10	以多层基板结构散热的发光二极管灯具		zh	康尚文; 簡坤誠
2007-07	LED lamp instantly dissipating heat as effected by multiple-layer substrates		en	康尚文; Kang, Shung-wen; 簡坤誠; Chien, Kun-cheng
2007-04	平板結構之震盪式均熱片		zh_TW	康尚文; 林玉興
2007-04	High power LED lighting assembly incorporated with a heat dissipation module with heat pipe		en	康尚文; Kang, Shung-wen; Tsai, Meng-chang; 簡坤誠; Chien, Kun-cheng
2001-10	自三次元方向呈微細化幾何造型之微小結構之製造方法		zh_TW	林清彬; 康尚文; 魏茂國
2001-04	Microfabrication Process for Making Microstructures as Geometrically Mimiaturized from Three-Dimensional Orientations		en	Lin, Ching-bin; 康尚文; Kang, Shung-wen; Wei, Mau-kuo

年度	活動名稱	主題/發表題目	活動單位	活動期間
112	工學院暨AI創智學院全英語授課教師社群-Sharing EMI Experiences in University-level English Instruction	工學院暨AI創智學院全英語授課教師社群-Sharing EMI Experiences in University-level English Instruction（2023-11-16 12:10:00 ~ 14:00:00）	人工智慧學系	2023-11-16 ~ 2023-11-16
111	淡江大學2023永續研發峰會-SectionI主題：永續與創新	淡江大學2023永續研發峰會-SectionI主題：永續與創新（2023-05-03 10:30:00 ~ 12:00:00）	研究發展處	2023-05-03 ~ 2023-05-03
110	MS Teams操作與iClass 學習平台導入工作坊	MS Teams操作與iClass 學習平台導入工作坊（2021-09-15 09:00:00 ~ 12:00:00）	教學支援組	2021-09-15 ~ 2021-09-15
110	iClass學習平台-課程設計與課堂模式(第一梯)	iClass學習平台-課程設計與課堂模式(第一梯)（2021-09-29 11:10:00 ~ 12:00:00）	教學支援組	2021-09-29 ~ 2021-09-29
110	iClass學習平台-作業規劃與互評(第二梯)	iClass學習平台-作業規劃與互評(第二梯)（2021-10-01 11:10:00 ~ 12:00:00）	教學支援組	2021-10-01 ~ 2021-10-01
110	工學院「多元與創新」教學研習~主題「遠距教學應用力：與學生一同成長學習」	工學院「多元與創新」教學研習~主題「遠距教學應用力：與學生一同成長學習」（2021-10-13 12:30:00 ~ 14:30:00）	機械與機電工程學系	2021-10-13 ~ 2021-10-13
110	110學年度第2學期工學院全英語授課教師社群活動(限工學院專任教師報名)	110學年度第2學期工學院全英語授課教師社群活動(限工學院專任教師報名)（2022-04-20 12:10:00 ~ 14:00:00）	機械與機電工程學系	2022-04-20 ~ 2022-04-20
110	2022淡江大學研發高峰會（2022 TKU Research Summit）	2022淡江大學研發高峰會（2022 TKU Research Summit）（2022-05-17 12:10:00 ~ 13:00:00）	品質保證稽核處	2022-05-17 ~ 2022-05-17
110	iClass 學習平台「遠距教學因應工作坊」(第二梯)	iClass 學習平台「遠距教學因應工作坊」(第二梯)（2022-05-27 14:10:00 ~ 16:00:00）	教學支援組	2022-05-27 ~ 2022-05-27
109	2021 台灣熱管理協會年會暨技術成果發表會	2021 台灣熱管理協會年會暨技術成果發表會	2021 台灣熱管理協會年會暨技術成果發表會	2021-04-22 ~ 2021-04-22
108	108學年度[財務資訊系統_計畫案]操作說明會(第2梯次)	108學年度[財務資訊系統_計畫案]操作說明會(第2梯次)（2019-10-30 14:00:00 ~ 16:00:00）	會計組	2019-10-30 ~ 2019-10-30
108	工學院「多元與創新」教學研習活動	工學院「多元與創新」教學研習活動（2019-11-19 12:00:00 ~ 14:00:00）	水資源及環境工程學系	2019-11-19 ~ 2019-11-19
108	面對COVID-19之即時線上教學方案說明會暨工作坊(第3場)-工學院	面對COVID-19之即時線上教學方案說明會暨工作坊(第3場)-工學院（2020-02-21 09:00:00 ~ 10:30:00）	教學支援組	2020-02-21 ~ 2020-02-21
108	第16屆全國熱管會議	第16屆全國熱管會議	第16屆全國熱管會議	2019-09-21 ~ 2019-09-22
108	iClass學習平台及Moodle遠距教學平台研習工作坊-「停課不停學」安心就學措施	iClass學習平台及Moodle遠距教學平台研習工作坊-「停課不停學」安心就學措施（2020-03-25 15:10:00 ~ 2020-03-31 20:00:00）	教學支援組	2020-03-25 ~ 2020-03-31
108	MS Teams進階教學工作坊(201)	MS Teams進階教學工作坊(201)（2020-04-27 13:10:00 ~ 2020-04-28 16:40:00）	教學支援組	2020-04-27 ~ 2020-04-28
108	1. 應邀至國立勤益科技大學進行專題演講,,主題:高溫熱管之研製	1. 應邀至國立勤益科技大學進行專題演講,,主題:高溫熱管之研製		2020-04-22 ~ 2020-04-22
108	International Heat Pipe Conference Committee-the Joint 20th IHPC (International Heat Pipe Conference) and the 14th IHPS (International Heat Pipe Symposium)	International Heat Pipe Conference Committee-the Joint 20th IHPC (International Heat Pipe Conference) and the 14th IHPS (International Heat Pipe Symposium)	International Heat Pipe Conference Committee-the Joint 20th IHPC (International Heat Pipe Conference) and the 14th IHPS (International Heat Pipe Symposium)	2020-02-27 ~ 2020-02-29
107	107學年度大四導師暨學輔人員輔導知能研習會	107學年度大四導師暨學輔人員輔導知能研習會（2018-11-13 11:50:00 ~ 14:00:00）	諮商暨職涯輔導組	2018-11-13 ~ 2018-11-13
107	iClass 學習平台成績管理工作坊(第一梯)	iClass 學習平台成績管理工作坊(第一梯)（2019-06-05 12:00:00 ~ 13:00:00）	教學支援組	2019-06-05 ~ 2019-06-05
107	台灣熱管理協會第五屆理事	台灣熱管理協會第五屆理事	淡江大學機械系教授	2019-04-24 ~ 2022-04-23
106	106學年度大二、大三導師暨訓輔人員輔導知能研習會	106學年度大二、大三導師暨訓輔人員輔導知能研習會（2018-05-03 11:50:00 ~ 14:00:00）	諮商輔導組	2018-05-03 ~ 2018-05-03
106	Joint 19th International Heat Pipe Conference and 13th international Heat Pipe Symposium	Joint 19th International Heat Pipe Conference and 13th international Heat Pipe Symposium	19屆國際熱管會議	2018-06-10 ~ 2018-06-14
106	International Heat Pipe Conference Committee-the Joint 19th IHPC (International Heat Pipe Conference) and the 13th IHPS (International Heat Pipe Symposium)	International Heat Pipe Conference Committee-the Joint 19th IHPC (International Heat Pipe Conference) and the 13th IHPS (International Heat Pipe Symposium)	International Heat Pipe Conference Committee-the Joint 19th IHPC (International Heat Pipe Conference) and the 13th IHPS (International Heat Pipe Symposium)	2017-11-01 ~ 2017-11-05
105	✹ 教學助理專業成長社群期末分享暨特優與優良教學助理頒獎	✹ 教學助理專業成長社群期末分享暨特優與優良教學助理頒獎（2016-12-08 12:10:00 ~ 13:30:00）	學生學習發展組	2016-12-08 ~ 2016-12-08
105	高等教育品牌建立與行銷招生策略	高等教育品牌建立與行銷招生策略（2017-04-20 13:00:00 ~ 15:00:00）	工學院	2017-04-20 ~ 2017-04-20
105	數位創新教學(行動載具)	數位創新教學(行動載具)（2017-05-18 12:00:00 ~ 13:00:00）	教師教學發展組	2017-05-18 ~ 2017-05-18
105	1st Asian Conference on Thermal Sciences (ACTS)	1st Asian Conference on Thermal Sciences (ACTS)	1st Asian Conference on Thermal Sciences (ACTS)	2017-03-26 ~ 2017-03-30
104	「英語教學分享，難上加難？」	「英語教學分享，難上加難？」（2015-10-20 12:00:00 ~ 14:00:00）	教師教學發展組	2015-10-20 ~ 2015-10-20
104	第十四屆全國熱管會議	第十四屆全國熱管會議	第十四屆全國熱管會議	2015-08-20 ~ 2015-08-22
104	「大學學習」課程教學講座--大一新生學涯與職涯發展	「大學學習」課程教學講座--大一新生學涯與職涯發展（2015-11-09 12:00:00 ~ 14:00:00）	教育心理與諮商研究所	2015-11-09 ~ 2015-11-09
104	Teaching and Learning in the States	Teaching and Learning in the States（2016-01-05 10:00:00 ~ 12:00:00）	教師教學發展組	2016-01-05 ~ 2016-01-05
104	英語成長團體研習課程	英語成長團體研習課程（2016-02-23 12:00:00 ~ 14:00:00）	教師教學發展組	2016-02-23 ~ 2016-02-23
104	Joint 18th International Heat Pipe Conference and 12th international Heat Pipe Symposium	Joint 18th International Heat Pipe Conference and 12th international Heat Pipe Symposium	Joint 18th International Heat Pipe Conference and 12th international Heat Pipe Symposium	2016-06-12 ~ 2016-06-16
103	英語授課教師驗分享(場次三)	英語授課教師驗分享(場次三)（2015-04-22 12:00:00 ~ 13:30:00）	教師教學發展組	2015-04-22 ~ 2015-04-22
101	2012 International Microsystems, Packaging, Assembly and Circuits Technology Conference	2012 International Microsystems, Packaging, Assembly and Circuits Technology Conference	2012 International Microsystems, Packaging, Assembly and Circuits Technology Conference	2012-10-24 ~ 2012-10-26
101	第十三届全国热管学术会议	第十三届全国热管学术会议	第十三届全国热管学术会议	2012-09-21 ~ 2012-09-24
101	常務理事	熱管理協會常務理事	熱管理協會	2013-05-16 ~ 9999-12-31
100	2011 International Microsystems, Packaging, Assembly and Circuits Technology Conference	2011 International Microsystems, Packaging, Assembly and Circuits Technology Conference	2011 International Microsystems, Packaging, Assembly and Circuits Technology Conference	2011-11-18 ~ 2011-11-21
100	2012 台灣熱管理協會年會暨技術成果發表會	2012 台灣熱管理協會年會暨技術成果發表會	2012 台灣熱管理協會年會暨技術成果發表會	2012-04-10 ~ 2012-04-10
99	2010 International Microsystems, Packaging, Assembly and Circuits Technology Conference	2010 International Microsystems, Packaging, Assembly and Circuits Technology Conference	2010 International Microsystems, Packaging, Assembly and Circuits Technology Conference	2010-10-20 ~ 2010-10-22
99	第十二屆全國熱管會議	第十二屆全國熱管會議	第十二屆全國熱管會議	2010-10-30 ~ 2010-11-02
99	2011 台灣熱管理協會年會暨技術成果發表會	2011 台灣熱管理協會年會暨技術成果發表會	2011 台灣熱管理協會年會暨技術成果發表會	2011-04-12 ~ 2011-04-12
99	中國機械工程學會第二十七屆學術研討會	中國機械工程學會第二十七屆學術研討會	中國機械工程學會第二十七屆學術研討會	2010-12-10 ~ 2010-12-11
98	2009 International Microsystems, Packaging, Assembly and Circuits Technology Conference	2009 International Microsystems, Packaging, Assembly and Circuits Technology Conference	2009 International Microsystems, Packaging, Assembly and Circuits Technology Conference	2009-10-21 ~ 2009-10-23
98	International Conference on Energy and Sustainable Development: Issues and Strategies, ESD 2010	International Conference on Energy and Sustainable Development: Issues and Strategies, ESD 2010	International Conference on Energy and Sustainable Development: Issues and Strategies, ESD 2010	2010-06-02 ~ 2010-06-04
98	The 15th International Heat Pipe Conference	The 15th International Heat Pipe Conference	The 15th International Heat Pipe Conference	2010-04-25 ~ 2010-04-29
98	University of Maryland Meeting with Dr. Kim (Jungho Kim), Prof. of Mechanical Engineering, UMD and Dr. Ku(Jentung Ku), Technology Development Group leader, NASA Goddard Space Flight Center, Greenbelt, MD	University of Maryland Meeting with Dr. Kim (Jungho Kim), Prof. of Mechanical Engineering, UMD and Dr. Ku(Jentung Ku), Technology Development Group leader, NASA Goddard Space Flight Center, Greenbelt, MD	University of Maryland	2010-04-21 ~ 2010-04-23
97	2009 台灣熱管理協會年會暨技術成果發表會	2009 台灣熱管理協會年會暨技術成果發表會	2009 台灣熱管理協會年會暨技術成果發表會	2009-03-11 ~ 2009-03-11
97	The 25th Semiconductor Thermal Measurement and Management Symposium	The 25th Semiconductor Thermal Measurement and Management Symposium	The 25th Semiconductor Thermal Measurement and Management Symposium	2009-03-15 ~ 2009-03-19
97	The 9th International Heat Pipe Symposium	The 9th International Heat Pipe Symposium	The 9th International Heat Pipe Symposium	2008-11-17 ~ 2008-11-20
97	第十一屆全國熱管會議	第十一屆全國熱管會議	第十一屆全國熱管會議	2008-09-07 ~ 2008-09-11
97	Effects of Silver-Nanofluids for Heat Pipe Applications	台灣熱管理協會 Effects of Silver-Nanofluids for Heat Pipe Applications	台灣熱管理協會	2009-03-11 ~ 2009-03-11
97	Fabrication of PCP Pulsating Heat Pipe	台灣熱管理協會 Fabrication of PCP Pulsating Heat Pipe	台灣熱管理協會	2009-03-11 ~ 2009-03-11
97	相變均熱技術研究進展與應用	台灣熱管理協會相變均熱技術研究進展與應用	台灣熱管理協會	2009-03-11 ~ 2009-03-11
97	Introduction of heat pipe and heat spreader	成功大學航太系 Introduction of heat pipe and heat spreader	成功大學航太系	2009-04-17 ~ 2009-04-17
96	The 24th Semionductor Thermal Measurement and Management Symposium	The 24th Semionductor Thermal Measurement and Management Symposium	The 24th Semionductor Thermal Measurement and Management Symposium	2008-03-16 ~ 2008-03-20
96	中國機械工程學會第二十四屆學術研討會	中國機械工程學會第二十四屆學術研討會	中國機械工程學會第二十四屆全國學術研討會	2007-11-23 ~ 2007-11-24
95	The　2nd IEEE International Conference on Nano/Micro Engineered and Molecular Systems	The　2nd IEEE International Conference on Nano/Micro Engineered and Molecular Systems	The　2nd IEEE International Conference on Nano/Micro Engineered and Molecular Systems	2007-01-16 ~ 2007-01-19
95	The 8th International Heat Pipe Symposium	The 8th International Heat Pipe Symposium	The 8th International Heat Pipe Symposium	2006-09-24 ~ 2006-09-27
94	擔任 Tamkang Journal of Science & Engineering國際學術期刊主任編輯委員	Tamkang Journal of Science & Engineering 擔任 Tamkang Journal of Science & Engineering國際學術期刊主任編輯委員	Tamkang Journal of Science & Engineering	2005-08-01 ~ 2007-05-07
93	The 13th International Heat Pipe Conference, September 21-25, , 2004	The 13th International Heat Pipe Conference, September 21-25, , 2004	The 13th International Heat Pipe Conference, September 21-25, , 2004	2004-09-21 ~ 2004-09-25
93	The 21st Annual IEEE Semiconductor Thermal Measurement and Management Symposium	The 21st Annual IEEE Semiconductor Thermal Measurement and Management Symposium	The 21st Annual IEEE Semiconductor Thermal Measurement and Management Symposium	2005-03-14 ~ 2005-03-17
93	我國奈米產業發展趨勢與商機	土地銀行我國奈米產業發展趨勢與商機	土地銀行	2005-03-23 ~ 2005-03-23
93	微小化的關鍵-冷却技術/微冷郤技術研討會	國立中央大學微小化的關鍵-冷却技術/微冷郤技術研討會	國立中央大學	2005-05-20 ~ 2005-05-20
93	擔任 Tamkang Journal of Science & Engineering國際學術期刊執行編輯委員	Tamkang Journal of Science & Engineering 擔任 Tamkang Journal of Science & Engineering國際學術期刊執行編輯委員	Tamkang Journal of Science & Engineering	2004-08-01 ~ 2005-07-31
93	熱流暨能源學門覆審委員	國科會熱流暨能源學門覆審委員	國科會	2005-01-01 ~ 2007-12-31
93	烏克蘭：基輔大學、基輔科技大學	烏克蘭：基輔大學、基輔科技大學	烏克蘭：基輔大學、基輔科技大學	2004-10-24 ~ 2004-11-04
93	工研院機械所、台曜電子公司	工研院機械所、台曜電子公司	工研院機械所、台曜電子公司	2005-01-10 ~ 2005-01-10
92	我國奈米科技發展趨勢與商機	土地銀行我國奈米科技發展趨勢與商機	土地銀行	2004-03-03 ~ 2004-03-03
92	熱管簡介	華梵大學熱管簡介	華梵大學	2004-04-02 ~ 2004-04-02
92	微冷却器技術與發展	台北科技大學微冷却器技術與發展	台北科技大學	2004-05-19 ~ 2004-05-19
83	理事	中華民國奈米及微機電系統協會理事	中華民國奈米及微機電系統協會	1995-01-01 ~ 2002-12-31

年度	發表日期	名稱
102	2013-08	蒸汽腔體均溫板應用於聚合?鏈鎖反之設計與測試
99	2011-01	應用集光型太陽熱電驅動史特靈引擎之薄膜蒸餾海水淡化技術研發-集光型太陽能驅動史特靈引擎熱電系統之研發(I)
98	2010-01	具薄層微燒結毛細結構蒸發器二相流裝置之研究
98	2010-01	均溫板燒結結構熱傳增強研究
97	2009-01	高功率LED照明系統散熱技術
97	2009-01	均溫板應用於多重熱源之設計與開發
97	2009-01	產學合作計畫均溫板燒結結構熱傳增強研究
97	2009-01	學界協助中小企業科技關懷計畫高功率LED散熱?片研究規劃
96	2008-01	產學合作計畫－新型空心銅珠燒結熱沉研製
96	2008-01	學界協助中小企業科技關懷計畫-鋁製均熱片研發規劃
96	2008-01	學界協助中小企業科技關懷計畫-均溫板應用於多熱源裝置之分析
96	2008-01	產學合作計畫－均溫板應用於多重熱源之設計與開發
96	2008-01	新型空心銅珠燒結熱沉研製
96	2008-01	高功率LED照明系統散熱技術
95	2007-01	提升產業技術及人才培育研究計畫—鋁質蒸汽腔體之研製
95	2007-01	97年度「跨領域－綠色科技」人才培育先導型計畫---太陽能熱電整合系統開發
95	2007-01	跨領域綠色科技人才培育先導型計畫─太陽能熱電整合系統開發
95	2007-01	震盪式均熱片之分析與研製
95	2007-01	鋁質蒸汽腔體之研製
95	2007-01	應用奈米流體於熱管之二相熱傳研究
94	2006-01	震盪式均熱片之分析與研製
94	2006-01	應用奈米流體於熱管之二相熱傳研究
93	2005-01	精密機電整合人才培育計畫
93	2005-01	新型矽晶鑲鑽散熱板材研製
92	2004-01	94年度「精密機電整合人才培育先導型計畫」(奈微米機電)
92	2004-01	迷你平板迴路式熱管之研製
92	2004-01	銅網毛細蒸汽腔體之研製
91	2003-01	九十二年度「精密機電設計與整合科技教育」產學聯盟教育計畫--微熱流元件實作課程及其
91	2003-01	九十三年度「精密機電整合科技教育改進計畫」
91	2003-01	微迴路式熱管之製造
91	2003-01	奈米流體應用於微迴路式熱管之研製
90	2002-01	微流系統之視流研究
90	2002-01	提升產業技術及人才培育研究計畫-微迴路式熱管之製造
90	2002-01	提昇私大研發能量專案-尖端材料研究的基礎建設(III)
90	2002-01	薄膜式熱管之製造與測試
90	2002-01	智慧型微熱管之製造測試研究(I)
89	2001-01	微熱管均熱片之研製
89	2001-01	微結構層接合技術
89	2001-01	提升產業技術及人才培育研究計畫-薄膜式熱管之製造與測試
89	2001-01	提昇私大研發能量專案-尖端材料研究的基礎建設(II)
89	2001-01	微冷卻器之整合研究-子計畫III:微冷卻器之封裝測試研究(III)
88	2000-01	微冷卻晶片陣列系統內之微結構層接合技術
88	2000-01	微冷卻器之整合研究-子計畫III：微冷卻器之封裝測試研究
88	2000-01	微冷卻器之整合研究-子計畫三：微冷卻器之封裝測試研究
87	1999-01	應用於微處理器之微冷卻器整合研究-微冷卻器之封裝及測試技術研究
86	1998-01	微型熱交換器的設計製造與測試
85	1997-01	微流道熱沉之研製
85	1997-01	微機電系統校際整合計畫-子計畫VI：微型熱交換器之設計製造與測試
84	1996-01	微光學平板熱壓成形技術研究
84	1996-01	微機電系統校際整合研究-子計畫八：微型熱交換器的設計製造與測試

年度	獎項名稱	頒獎單位
112	Numerical Flow Investigation of Hybrid Regenerator	淡江大學
112	A Combined Technique using Phase Change Material and Jet Impingement Heat Transfer for the Exhaust Heat Recovery Applications – A Numerical Approach	淡江大學
112	Correlations Based on Numerical Validation of Oscillating Flow Regenerator	淡江大學
112	Study of Gas-to-Liquid Heat Pipe Heat Exchanger	淡江大學
112	Study on Circulation Flow in Closed Loop Pulsating Heat Pipe	淡江大學
110	科技部產學計畫「光學感測器用高階史特靈冷凍系統開發」獲得科技部工程司110年度「產學合作計畫線上成果發表暨績效考評會」優良獎(海報組)	科技部
110	科技110年度「產學合作計畫線上成果發表暨績效考評會」優良獎(海報組)	科技部
109	2021 台灣熱管理協會年會暨技術成果發表會「最佳論文獎」	台灣熱管理協會
107	Visualization and thermal resistance measurements for a magnetic nanofluid pulsating heat pipe	淡江大學
105	Operation of a Two-Phase Reverse Loop Thermosyphon	淡江大學
103	Analysis of Thermal Resistance Characteristics of Power LED Module	淡江大學
103	Visualization and thermal resistance of a sintered wicks structure evaporator in a two phase loop thermosyphon	淡江大學
102	Feasibility study of an aluminum vapor chamber with radial grooved and sintered powders wick structures	淡江大學
102	Experimental studies of thermal resistance in a vapor chamber heat spreader	淡江大學
101	Fabrication of composite wick structure heat spreader	淡江大學
101	Multiple-Layer Heat Dissipation Module for LED Streetlamps	淡江大學
100	2012 台灣熱管理協會年會暨技術成果發表會「優秀論文獎」第二名	台灣熱管理協會
100	Thermal Performance of a Loop Thermosyphon	淡江大學
99	Fabrication of microneedles	淡江大學
99	Protective effects of myricetin against ultraviolet-B-induced damage in human keratinocytes	淡江大學
99	Strain analysis of vapor chamber heat Spreaders	淡江大學
99	第十二屆全國熱管會議「優秀論文獎」	第十二屆全國熱管會議籌備組
98	Fabrication of polydimethylsiloxane (PDMS) pulsating heat pipe	淡江大學
98	Experimental investigation of nanofluids on sintered heat pipe thermal performance	淡江大學
97	Effect of silver nano-fluid on pulsating heat pipe thermal performance	淡江大學
97	Fabrication and investigation of PDMS micro-diffuser/nozzle	淡江大學
96	Experimental investigation of silver nano-fluid on heat pipe thermal performance	淡江大學
96	A comparison between Triangular Grooves, Star Grooves and Rhombus Grooves in Micro Heat Pipe Manufacture	淡江大學
96	Micro Fuse Fabrication and Testing	淡江大學
96	Analysis of effectiveness and pressure drop in micro cross-flow heat exchanger	淡江大學
95	Experimental Investigation of Fluid Flow and Heat Transfer in Microchannels	淡江大學
95	Axial Heat Conduction Model to Predict Maximum Heat Remove of Miniature Heat Pipe Based on Grey Model Theory	淡江大學
95	Manufacturing of Film-Type Heat pipe	淡江大學
95	Fanno-Line Flow in Microtubes	淡江大學
95	Brazing diffusion bonding of micro-nikel cylinders and SUS-316 stainless steel	淡江大學
95	Performance Testing of Micro Loop Heat Pipes	淡江大學
94	Fabrication of SU-8 embedded microchannels with circular cross-section	淡江大學
94	The Manufacture and Test of (110) Orientated Silicon Based Micro Heat Exchanger	淡江大學
93	Metallic micro heat pipe heat spreader fabrication	淡江大學
93	大學及技專校院辦理就業學(課)程計畫：半導體精密製造設計工程師培訓課程銅牌獎	勞委會
92	三維高分子微文氏管製造技術	淡江大學
92	輻射狀流道微熱管之製造與測試	淡江大學
91	星形與菱形流道微熱館之研製	淡江大學
89	Improvement of thickness uniformity in nickel electroforming for the LIGA process	淡江大學
87	Surface roughness of (110) orientation silicon based micro heat exchanger channel	淡江大學
86	微型熱交換器之設計製造與測試。	淡江大學
83	Micro heat exchangers fabricated by diamond machining	淡江大學
82	Micro Cross-Flow Heat Exchanger	淡江大學
75	有機液體中複數汽泡之消滅	淡江大學
74	有機液體中複數汽泡之消滅	淡江大學